International
Conference Presentations
1.
Zarogiannis T.,
A. I. Papadopoulos, and P. Seferlis, “Control Studies of Organic Rankine Cycles with Different Working Fluid Mixtures”, 20th Conference on Process Integration, Modelling and Optimisation for Energy
Saving and Pollution Reduction, PRES’17, Tianjin, P. R. China, 2017.
2.
Kyriakides A.
S., P. Seferlis, S. Voutetakis, and S. Papadopoulou, “Investigating the Simultaneous Process
Design and Control of A Membrane Reactor for Hydrogen Production via Methane
Steam Reforming”, 20th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’17, Tianjin, P. R. China, 2017.
3.
Chatzisakoula S., K. Panopoulos, P. Seferlis, and S. Voutetakis, “Design of Energy Systems with Biomass
Utilization using Gasification and Torrefaction in
Quicklime Plants”, 20th Conference on
Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’17, Tianjin, P. R. China, 2017.
4.
Kyriakides A.
S., T. Zarogiannis, and P. Seferlis, “Integrated
Process Design and Control: A review of the Current State-of-the-Art and
Research Challenges”, 20th Conference on
Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’17, Tianjin, P. R. China, 2017.
5.
Zarogiannis T.,
A. I. Papadopoulos, P. Seferlis, and P. Linke, “The
Impact of Novel and Conventional Working Fluids on the Control Performance in
Organic Rankine Cycles”, European Symposium on Computer Aided Chemical Engineering 27,
Barcelona, Spain, 2017.
6.
Limleamthong P, González-Miquel M., S. Papadokonstantakis, A. I. Papadopoulos, P. Seferlis, and G.
Guillén-Gosálbez, “Screening of Solvents for CO2
Capture considering Sustainability Criteria via Data Envelopment Analysis”, European Symposium on Computer Aided Chemical
Engineering 27, Barcelona, Spain, 2017.
7.
Zarogiannis T.,
A. I. Papadopoulos, P. Seferlis and P. Linke “On the
Impact of Working Fluid Mixtures in the Control Performance of Organic Rankine Cycles”, oral presentation, Computer Aided Process
Engineering (CAPE) Forum 2017 “Circular Economy and Green Chemistry”, Athens,
Greece, 2017.
8.
Zarogiannis T.,
A. I. Papadopoulos, P. Seferlis, “On the Systematic Screening of Mixtures as
CO2 Capture Solvents”, 9th Trondhein Carbon Capture
and Sequestration Conference, Trondheim, Norway, 2017.
9.
Damartzis T.,
A. I. Papadopoulos, P. Seferlis, “Performance assessment of solvent-based CO2
capture processes: Design of complex flowsheets with
different solvents”, 9th Trondhein Carbon Capture and
Sequestration Conference, Trondheim, Norway, 2017.
10.
Kyriakides A.
S., P. Seferlis, S. Voutetakis and S. Papadopoulou, “Investigating the Simultaneous Process
Design and Control of A Membrane Reactor for Hydrogen Production via Methane
Steam Reforming”, Computer Aided Process Engineering (CAPE) Forum 2017 “Circular
Economy and Green Chemistry”, Athens, Greece, 2017.
11.
Barkaoui A.
E., Y. Zarhloule, A. Rimi,
A. Correia, S. Voutetakis ,
P. Seferlis, “Geothermal Country Update Report of Morocco (2010-2015)”, World Geothermal Congress, Melbourne,
Australia, 2015.
12.
Zarogiannis T.,
A.I. Papadopoulos, and P. Seferlis, “A Framework for the Preliminary Screening
of Mixtures As Post-Combustion CO2 Capture Solvent Candidates”, paper 408b, Annual AIChE
Meeting, Salt Lake City, 2015.
13.
Mavrou P.,
A.I. Papadopoulos, P. Seferlis, P. Linke, and S. S. Voutetakis, “A Systematic Sensitivity Analysis Approach for
the Design of Organic Rankine Cycles and the
Selection of Efficient Working Fluids Under Operational Variability”, paper
463f, Annual AIChE
Meeting, Salt Lake City, 2015.
14.
Damartzis T.,
A.I. Papadopoulos, and P. Seferlis, “Optimal Design of Solvent-Based
Post-Combustion CO2 Capture Plants Using Phase-Change Solvents”, paper 687f, Annual AIChE Meeting,
Salt Lake City, 2015.
15.
Ziogou C.,
D. Giaouris, C. Yfoulis, F.
Stergiopoulos, P. Seferlis, S.S. Voutetakis,
and S. Papadopoulou, “Efficient Decision Making Based
on a Hybrid Power Distribution Strategy - Application to a Fuel Cell Electric
Vehicle”, paper 244f, Annual AIChE Meeting, Salt Lake City, 2015.
16.
Kyriakides
A.S., S. Voutetakis, S. Papadopoulou,
and P. Seferlis, “Optimization of a Membrane Reactor for Low Temperature
Methane Steam Reforming”, 18th Conference
on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’14, Kuching, Malaysia, 2015.
17.
Zarogiannis T.,
A.I. Papadopoulos, and P. Seferlis, “Systematic Selection of Mixtures as
Post-combustion CO2 Capture Solvent Candidates”, 18th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’14, Kuching, Malaysia, 2015.
18.
Damartzis T.,
A. I. Papadopoulos, and P. Seferlis, “An Integrated Framework for
Controllability Assessment and Solvent Selection in Post-Combustion CO2 Capture
Processes”, Process Systems Engineering
2015 – European Symposium on Computer Aided Chemical Engineering 25,
Copenhagen, Denmark, 2015.
19.
Giaouris D.,
A. I. Papadopoulos, P. Seferlis, S. Papadopoulou, and
S. Voutetakis, “Adaptive Management of Renewable
Energy Smart Grids Using a Power Grand Composite Curves Approach”, Process Systems Engineering 2015 –
European Symposium on Computer Aided Chemical Engineering 25, Copenhagen,
Denmark, 2015.
20.
Damartzis T.,
A. I. Papadopoulos, P. Seferlis, “Systematic Design of High Performance
Post-Combustion CO2 capture Flowsheets Considering
Different Solvents”, Process Systems
Engineering 2015 – European Symposium on Computer Aided Chemical
Engineering 25, Copenhagen, Denmark, 2015.
21.
Stijepovic M.
Z., A. I. Papadopoulos, P. Linke, P. Seferlis, “Design of Rankine
cycles for waste heat to power conversions in Carbon Capture compression
trains”, Process Systems Engineering 2015
– European Symposium on Computer Aided Chemical Engineering 25,
Copenhagen, Denmark, 2015.
22.
Damartzis T.,
A. I. Papadopoulos, and P. Seferlis, “A Process Design and Operability
Framework for Post-Combustion CO2 Capture Systems and Solvents: Integrated
Assessment and Selection”, Paper 681e, Annual
AIChE Meeting, Atlanta, USA, 2014.
23.
Ziogou C.,
D. Giaouris, C. Yfoulis, F.
Stergiopoulos, P. Seferlis, S. S. Voutetakis,
and S. Papadopoulou, “Supervisory Energy Management
of an Integrated Fuel Cell / Battery System for Vehicular Applications”, Paper
579h, Annual AIChE
Meeting, Atlanta, USA, 2014.
24.
Badr S., S. Papadokonstantakis, K. Hungerbühler,
T. Damartzis, and P. Seferlis, “Benchmarking Process
Alternatives for Post-Combustion CO2 Capture from a Sustainability
Perspective”, Paper 681b, Annual AIChE Meeting, Atlanta, USA, 2014.
25.
Damartzis T.,
A. I. Papadopoulos, and P. Seferlis, “Generalized Modeling Framework for the
Optimal Synthesis of Solvent-Based Post-Combustion CO2 Capture Processes”,
Paper 681a, Annual AIChE
Meeting, Atlanta, USA, 2014.
26.
Seferlis P., I. Stavrakis, and A. I. Papadopoulos, “Homotopy
Continuation Solution Method with Advanced Step Implementation for Nonlinear
Model Predictive Control”, Paper 570f, Annual
AIChE Meeting, Atlanta, USA, 2014.
27.
Giaouris D.,
A. I. Papadopoulos, P. Seferlis, S. Papadopoulou, and
S. S. Voutetakis, “Adaptive Energy Management in
Renewable Energy Smart Grids Using the Power Grand Composite Curves Approach”,
Paper 569f, Annual AIChE
Meeting, Atlanta, USA, 2014.
28.
Papadopoulos A.
I., S. Badr, A. Chremos, E.
Forte, T. Zarogiannis, P. Seferlis, S. Papadokonstantakis, C. S. Adjiman,
A. Galindo, and G. Jackson, “Molecular Design of Optimum CO2 Capture Solvents:
From Conceptual Screening to SAFT-Based Validation”, Paper 524c, Annual AIChE
Meeting, Atlanta, USA, 2014.
29.
Damartzis T.,
A. I. Papadopoulos, and P. Seferlis, “Performance Assessment of Solvent-Based
CO2 Capture Processes: Design of Complex Flowsheets
with Different Solvents”, Paper 554f, Annual
AIChE Meeting, Atlanta, USA, 2014.
30.
Chatziagorakis P., C. Elmasides, G. C. Sirakoulis, I. Karafyllidis, I. Andreadis, N. Georgoulas, D. Giaouris, A. I. Papadopoulos, C. Ziogou,
D. Ipsakis, S. Papadopoulou,
P. Seferlis, F. Stergiopoulos, and S. Voutetakis, “Cellular Automata Model with Game Theory for
Power Management of Hybrid Renewable Energy Smart Grids”, 11th International Conference on Cellular Automata for Research and
Industry, ACRI 2014, Krakow, Poland, 2014.
31.
Chatziagorakis P., C. Elmasides, G. C. Sirakoulis, I. Karafyllidis, I. Andreadis, N. Georgoulas, D. Giaouris, A. I. Papadopoulos, C. Ziogou,
D. Ipsakis, S. Papadopoulou,
P. Seferlis, F. Stergiopoulos, and S. Voutetakis, “Application of Neural Networks Solar Radiation
Prediction for Hybrid Renewable Energy Systems”, 15th International Conference, EANN 2014, Sofia, Bulgaria, 2014.
32.
Damartzis T.,
A. Kouneli, A. I. Papadopoulos, P. Seferlis, G. Dimitriadis, and G. Vlachopoulos,
“Optimal design of solvent based post combustion CO2 capture processes in
quicklime plants”, 17th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’14, Prague, Czech Republic,
2014.
33.
Liew P. Y., J. J. Klemes, A. Doukelis, N. Zhang,
and P. Seferlis, “Identification of Process Integration Options for CO2 Capture
in Greek Lignite-Fired Power Plant”, 17th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’14, Prague, Czech Republic,
2014.
34.
Mavrou P.,
A. I. Papadopoulos, M. Stijepovic, P. Seferlis, P. Linke, and S. Voutetakis,
“Assessment of working fluid mixtures for solar Rankine
cycles”, 17th Conference on
Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’14, Prague, Czech Republic,
2014.
35.
Papadopoulos A.
I., S. Badr, A. Chremos, T.
Zarogiannis, P. Seferlis, S. Papadokonstantakis,
C. S. Adjiman, A. Galindo, and G. Jackson, “On the
efficient screening and selection of post-combustion CO2 capture solvents”, 17th Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’14, Prague, Czech Republic, 2014.
36.
Giaouris D.,
A. I. Papadopoulos, P. Seferlis, S. Papadopoulou, S. Voutetakis, F. Stergiopoulos, and
C. Elmasides, “Optimum energy management in smart
grids based on power pinch analysis”, 17th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’14, Prague, Czech Republic,
2014.
37.
Stijepovic M.
Z., A. I. Papadopoulos, P. Linke, A. S. Grujic, and P. Seferlis, “Design of Multi-pressure Organic Rankine Cycles for Waste Heat Recovery in Site Utility
Systems”, European Symposium in Computer
Aided Process Engineering-24, Budapest, Hungary, 2014.
38.
Papadopoulos A.
I., M. Stijepovic, P. Linke,
P. Seferlis, and S. Voutetakis, “Molecular Design and
Sensitivity Analysis for Optimum ORC Working Fluid Mixtures”, ASME ORC-2013, Rotterdam, The
Netherlands, 2013.
39.
Papadopoulos A.
I., M. Stijepovic, P. Linke,
P. Seferlis, and S. Voutetakis, “Molecular Design of
Working Fluid Mixtures for Organic Rankine Cycles”, European Symposium in Computer Aided Process
Engineering-23, Lappeenranta,
Finland, 2013.
40.
Efstathiadis T., Kalfas A. I., P. Seferlis, A. Traverso, and M. .Rivarollo, “A
Preliminary Turbine Design for an Organic Rankine
Cycle”, ASME Turbo Expo, San Antonio,
U.S.A., 2013.
41.
Giaouris D.,
A. I. Papadopoulos, Ziogou C., Ipsakis
D., P. Seferlis, S. Papadopoulou, S. Voutetakis, and C. Elmasides,
“Optimization of Hybrid Renewable Power Generation Flowsheets
Using Generic Structural and Temporal Models”, 16th Conference Process Integration, 16th Conference on
Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’13, Rhodes, Greece, 2013.
42.
Ziogou C.,
D. Ipsakis, P. Seferlis, Bezergianni
S., S. Papadopoulou, and S. Voutetakis,
“Performance Assessment and Efficiency of a Renewable Hydrogen Production
Station based on a Supervisory Control Methodology”, 16th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’13, Rhodes,
Greece, 2013.
43.
Kyriakides A.
S., Ipsakis D., S. Voutetakis,
S. Papadopoulou, and P. Seferlis, “Modeling and
Simulation of a Membrane Reactor for the Low Temperature Methane Steam
Reforming”, 16th Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’13, Rhodes, Greece, 2013.
44.
Ipsakis D.,
S. Papadopoulou, S. Voutetakis,
and P. Seferlis, “Analysis and Implementation of a Plant-Wide Control System
for an LPG Reforming-Fuel Cell Power System”, 16th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’13, Rhodes,
Greece, 2013.
45.
Ved O. V., P.
Seferlis, and P. O. Kapustenko, “A multi-level
mathematical model of the CO catalytic conversion process”, 16th Conference on Process Integration, Modelling and Optimisation for
Energy Saving and Pollution Reduction, PRES’13, Rhodes, Greece, 2013.
46.
Giaouris D., Ziogou C., Papadopoulos S., Ipsakis
D., P. Seferlis, S. Papadopoulou, Elmasidis
C., Sergiadis G., and S. Voutetakis,
“Deployment and operation of an isolated smart grid”, 35th International Telecommunications Energy Conference, Hamburg,
Germany, 2013.
47.
Tarabsheh Α.
Α., S. Voutetakis, A. I. Papadopoulos, P.
Seferlis, Etier I., and O. Saraereh,
“Investigation of Temperature Effects in Efficiency Improvements of
Non-Uniformly Cooled Photovoltaic Cells”, 16th
Conference on Process Integration, Modelling and Optimisation for Energy Saving and Pollution Reduction,
PRES’13, Rhodes, Greece, 2013.
48.
Pechlivanos L.,
and P. Seferlis, Pricing and Inventory Decisions in Competing Supply Chain
Networks: The Duopoly Case, 26th European
Conference on Operations Research, Rome, Italy, 2013.
49.
Hüser N., E.Y. Kenig, Damartzis T., A. I.
Papadopoulos, and P. Seferlis, “Solvent based CO2 capture process design
framework through innovative modelling and pilot
plant validation experiments”, Carbon
Capture & Sequestration Conference, Antwerpen,
Belgium, 2013.
50.
Papadopoulos A.
I., T. Zarogiannis, and P. Seferlis, “Computer-aided
screening for optimum solvent candidates in post-combustion CO2 capture”, Carbon Capture & Sequestration
Conference, Antwerpen, Belgium, 2013.
51.
Giaouris D.,
A. I. Papadopoulos, Ziogou C., Ipsakis
D., P. Seferlis, S. Papadopoulou, and S. Voutetakis, “Generic Modeling, Design and Operating Optimization
of Hybrid Renewable Power Generation Flowsheets
Including Hydrogen Storage”, Annual AIChE Meeting, Pittsburgh, USA, 2012.
52.
Papadopoulos A.
I., M. Stijepovic, P. Linke,
P. Seferlis, and S. Voutetakis, “Computer-Aided
Synthesis and Design of Working Fluid Mixtures for Organic Rankine
Cycles”, Annual AIChE
Meeting, Pittsburgh, USA, 2012.
53.
Giaouris D., S. Voutetakis, S. Papadopoulou,
P. Seferlis, F. Stergiopoulos, D. Ipsakis, C. Ziogou, A. I. Papadopoulos, S. Banerjee, and C. Elmasides, “Nonlinear Behaviour of Interleaved Boost
Converters Used in Renewable Energy Applications”, 2012 International
Symposium on Nonlinear Theory and its Applications, Majorca, Spain, 2012.
54.
Ipsakis D.,
S. Voutetakis, S. Papadopoulou,
P. Seferlis, C. Elmasides, K. Papadaki,
S. Mastrogeorgopoulos, and A. S. Kyriakides,
“Dynamic Modeling and Control of a Steam Reformer-Fuel Cell Power System
Operating on LPG for Vehicular Applications”, 15th Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’12, Prague, Czech
Republic, 2012.
55.
Ziogou C.,
D. Ipsakis, K. G. Tsita, P.
Seferlis, S. Bezergianni, S. Papadopoulou,
and S. Voutetakis, “A Novel and Flexible Energy
Management Strategy with Application in a Hydrolytic Solar Hydrogen Autonomous
System”, 15th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’12, Prague, Czech Republic, 2012.
56.
Pechlivanos L., and P. Seferlis, “Pricing-cum-inventory decisions
in supply chain networks”, European Conference on Operations Research, Vilnius, 2012.
57. Seferlis P., I. Stavrakis, and A. I. Papadopoulos, “Homotopy Continuation Solution Method in Nonlinear Model Predictive Control Applications”, European Symposium on Computer Aided Process Engineering-22, London, U.K., 2012.
58.
Papadopoulos A. I., M. Stijepovic,
P. Linke, P. Seferlis, and S. Voutetakis
“Multi-level Design and Selection of Optimum Working Fluids and ORC Systems for
Power and Heat Cogeneration from Low Enthalpy Renewable Sources”, European Symposium on Computer Aided Process
Engineering-22, London, U.K., 2012.
59.
Stavrakis I., and P.
Seferlis, “A Fast and Effifient Algorithm for
Nonlinear Model Predictive Control Applications”, 4th International Conference
on Manufacturing Engineering, ICMEN, Thessaloniki, Greece, 2011.
60.
Papadopoulos Α. Ι., M. Stijepovic, Linke P., P. Seferlis, and S. Voutetakis, “Computer-Aided
Design and Selection of Optimum Working Fluids and ORC Systems for Power
Generation from Low-Enthalpy Heat Sources”, 1st
International Seminar on ORC Power
Systems, ORC2011, Delft, The Netherlands, 2011.
61.
Ipsakis D., S. Voutetakis, S. Papadopoulou, and P. Seferlis, “Disturbance Rejection
Sensitivity Analysis in an Integrated Methanol Reforming and PEM Fuel Cell
System”, International Conference on
Hydrogen Production, Thessaloniki, Greece, 2011.
62.
Giannakoudis G., A. I.
Papadopoulos, P. Seferlis, and S. Voutetakis, “A Data-mining
Approach for Efficient Systems Optimization under Uncertainty using Stochastic
Search Methods”, European Symposium on
Computer Aided Process Engineering-21, Chalkidiki,
Greece, 2011.
63.
Bounovas V., A. I.
Papadopoulos, P. Seferlis, and S. Voutetakis, ““Energy Supply Chain Optimization under Demand Variation
and Emission Constraints”, 14th
Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’11, Florence, Italy, 2011.
64.
Seferlis P.,
“System Poles and Zeros Sensitivity for Dynamic Process Controllability”, American Control Conference,
65.
Pechlivanos L.,
and P. Seferlis, “Pricing-Cum-Inventory Decisions in Supply Chain Networks”, International Conference on Operations Research,
66.
Papadopoulos A. I., M. Stijepovic,
P. Linke, P. Seferlis, and S. Voutetakis, “Power Generation from Low Enthalpy
Geothermal Fields by Design and Selection of Efficient Working Fluids for
Organic Rankine Cycles”, 13th Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’10,
67.
Giannakoudis G., A. I. Papadopoulos, P. Seferlis, and S. Voutetakis,
“On the Systematic Design and Optimization Under Uncertainty of a Hybrid Power
System”, European Symposium on Computer
Aided Process Engineering-20,
68.
Ziogou C., S. Papadopoulou, P. Seferlis, and
S. Voutetakis “An
Efficient Multi-Objective Model Predictive Framework of a PEM Fuel Cell”, ADCHEM,
69.
Ipsakis D., S. Voutetakis, P. Seferlis, and S. Papadopoulou, “Dynamic Modeling and Control Issues on a
Methanol Reforming Unit for Hydrogen Production and Use in a PEM Fuel Cell”, ADCHEM,
Istanbul, Turkey, 2009.
70.
Papadopoulos A.
I., and P. Seferlis, “Environmentally benign and cost optimal phosphoric acid
production through a systematic process design framework”, CEMEPE,
71.
Ipsakis D., S. Voutetakis, P. Seferlis, S. Papadopoulou,
and M. Stoukidis, “Modeling
and Analysis of an Integrated Power System Based on Methanol Autothermal Reforming”, 17th Mediterranean
Conference on Control and Automation,
72.
Papadopoulos A. I., and P. Seferlis, “A framework for solvent selection based on optimum
separation process design and controllability properties”, European Symposium on Computer Aided Process Engineering-19,
Krakow, Poland, 2009
73.
Ziogou C.,
D. Ipsakis, F. Stergiopoulos,
S. Voutetakis, P. Seferlis, S. Papadopoulou,
and C. Elmasides, “Automation and Operation
Strategies in a Stand-Alone Power System that uses Solar and Wind Energy in
Conjunction with Hydrogen Long-Term Storage”, IFAC Symposium on Power Plants and Power Systems Control, Tampere,
Finland, 2009.
74.
Ipsakis D.,
G. Giannakoudis, A. I. Papadopoulos, P. Seferlis, and
S. Voutetakis, “Οptimization of a Stand-Alone Power System based on
Renewable Energy Sources”, 12th
Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’09, Rome, Italy, 2009.
75.
Papadopoulos A. I., and P. Seferlis, “Systematic Process Integration
Technologies For Cost Optimal And Environmentally Benign Phosphoric Acid
Production”, COVAPHOS III,
76.
Papadopoulos A.
I., and P. Seferlis, “Effects of Solvent Selection in Optimal Separation
Process Design and Controllability Properties Using a Nonlinear Sensitivity
Analysis Approach”, Annual AIChE Meeting,
77.
Damartzis T.,
and P. Seferlis, “Optimal Design of Three-Phase Reactive Distillation Columns
Using Nonequilibrium/Collocation Models”, Annual AIChE
Meeting,
78.
Ouzounidou M.,
D. Ipsakis, S. Voutetakis,
S. Papadopoulou, and P. Seferlis, “Experimental
Studies and Optimal Design for a Small-Scale Autonomous Power System Based on
Methanol Reforming and a PEM Fuel Cell”, Annual
AIChE Meeting,
79.
Papadopoulos A.
I., and P. Seferlis, “A Systematic Bi-Level Approach for Efficient Process
Optimization Under Uncertainty Using Stochastic Annealing”, Annual AIChE
Meeting, Philadelphia, USA, 2008.
80.
Seferlis P., D.
Vlachos, E. Iakovou, and A. Xanthopoulos,
“An
Optimal Control Theory-Based Framework for Supply Chain Resilience”, 3rd International Conference on
Manufacturing Engineering, ICMEN, Chalkidiki,
Greece, 2008.
81.
Ziogou C.,
S. Voutetakis, S. Papadopoulou,
P. Seferlis and N. Karampetakis, “Maximum Power Targeting
for the PEM Fuel Cell using an NMPC Framework”, International Workshop on Assessment and Future Directions of Nonlinear
Model Predictive Control, NMPC’08, Pavia, Italy, 2008.
82.
Ouzounidou M.,
D. Ipsakis, S. Voutatekis,
S. Papadopoulou, and P. Seferlis, “A Pilot Plant for
Hydrogen Production via Methanol Reforming for Power Generation in a PEM Fuel
Cell”, 11th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’08, Prague, Czech Republic, 2008.
83.
Papadopoulos A.
I., and P. Seferlis, “Design of Energy Efficient and Environmentally Conscious
Industrial Phosphoric Acid Production Processes”, 11th Conference on Process
Integration, Modelling and Optimisation
for Energy Saving and Pollution Reduction, PRES’08, Prague, Czech Republic, 2008.
84.
Papadopoulos A.
I., and P. Seferlis. “A Generic Framework for Modeling, Design and Optimization
of Industrial Phosphoric Acid Production Processes”, European Symposium on Computer Aided Process Engineering–18,
85.
Ipsakis D.,
S. Voutetakis, F. Stergiopoulos,
P. Seferlis, C. Elmasides, S. Papadopoulou,
and C. Keivanidis. “Energy Management in a
Stand-Alone Power System for the Production of Electrical Energy with Long Term
Hydrogen Production”, European Symposium on Computer Aided Process Engineering–18,
86.
Papadopoulos A.
I., and P. Seferlis, “Generic Modelling, Design and
Optimization of Industrial Phosphoric Acid Production Processes”, Computer Aided Process Engineering Forum,
87.
Anastasiou I., Ziogou C., Kostaras K., S. Papadopoulou, S. Voutetakis, and
P. Seferlis, “Model Predictive Control of a Cyclic Propylene Steaming Pilot
Plant”, Computer Aided Process Engineering Forum, Thessaloniki, Greece,
2008.
88.
Bollas G.,
I. Anastasiou, S. Papadopoulou,
S. Voutetakis, and P. Seferlis, “A Non-Linear MPC
Strategy for Feed Conversion Targeting in a FCC Pilot Plant”, Computer Aided Process
Engineering Forum, Thessaloniki, Greece, 2008.
89.
Ipsakis D.,
S. Voutetakis, P. Seferlis, F. Stergiopoulos,
S. Papadopoulou, and C. Elmasides, “Operating Policy and Simulation
Studies of a Stand-Alone Power System Using Renewable Energy Sources and
Hydrogen Storage”, Computer Aided Process
Engineering Forum, Thessaloniki, Greece, 2008.
90.
Ipsakis D.,
S. Voutetakis, P. Seferlis, F. Stergiopoulos,
S. Papadopoulou, and C. Elmasides,
S. Papadopoulou, and C. Keivanidis.
“Design and Operation Optimization for a Stand-Alone Power System Using
Renewable Energy Sources and Hydrogen Storage”, EMINENT-2 Workshop,
91.
Koltsova E.,
P. Seferlis, J. J. Klemes, P. Kapustenko,
A. D. Bojarski, L. Puigjaner,
R. Suleymanov, and I. Bulatov,
“Information system for phosphorous containing compounds”, European Congress of Chemical Engineering 6, ECCE-6, Copenhagen,
Denmark, 2007.
92.
Ipsakis D.,
F. Stergiopoulos, S. S. Voutetakis,
P. Seferlis, and C. Elmasides. “Study of an
autonomous power system based on solar and wind energy with hydrogen as the
intermittent energy source for future use”, 4th
Dubrovnik Conference on Sustainable Development of Energy Water and Environment
Systems, Dubrovnik, Croatia, 2007.
93.
Bollas G. M., I. Anastasiou, S. A. Papadopoulou,
S. S. Voutetakis, and P.
Seferlis. “Feed conversion
targeting in an FCC pilot plant using a non-linear MPC strategy”, American Control
94.
Ipsakis D., P. Kechagiopoulos, C. Martavaltzi,
S. Voutetakis, P. Seferlis, P. Daoutidis,
and F. Stergiopoulos, “Study of an integrated system
for the production of hydrogen by autothermal
reforming of methanol”, European
Symposium on Computer Aided Process Engineering–17, Bucharest, Romania, 2007.
95.
Voutetakis S.,
G. M. Bollas, I. Anastasiou,
C. Ziogou, S. A. Papadopoulou,
and P. Seferlis. “A non-linear MPC strategy for conversion targeting in a FCC
pilot plant”, PSE User’s Meeting,
96.
Voutetakis S.,
G. M. Bollas, I. Anastasiou,
C. Ziogou, S. A. Papadopoulou,
and P. Seferlis. “A non-linear MPC strategy for conversion targeting in a FCC
pilot plant – Development and online implementation”, Nonlinear Model Predictive Control –
Software Applications, NMPC-SOFAP 2007 Workshop,
97.
Papadopoulos A. I., K. Theodosiadis,
and P. Seferlis. “Modeling, Design
and Optimization of Industrial Phosphoric Acid Production Processes”, 10th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’07,
98.
Theodosiadis K., A. I.
Papadopoulos, and P. Seferlis. “Modeling
of the reactor-crystallizer unit of a phosphoric acid production plant”, 10th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’07,
99.
Ipsakis D., C. Elmasides, F. Stergiopoulos, S. Voutetakis, and P. Seferlis. “Simulation of a stand-alone power system
using renewable energy sources and hydrogen storage”, 10th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’07,
100.
Bollas G.
M., S. A. Papadopoulou, A. A. Lappas,
S. S. Voutetakis, P. Seferlis, and I. A. Vasalos. “Application of a model predictive control
strategy on a fluid catalytic cracking pilot plant”, Annual AIChE Meeting,
101.
Seferlis P., J.
J. Klemeš, I. Bulatov, E. Koltsova, and P. Kapustenko. “Development
of Sustainable Processes for Waste Utilisation in Phosphoric Acid Industry”, 9th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’06,
102.
Bollas G.
M., S. Avramidis, S. A. Papadopoulou,
A. A. Lappas, S. S. Voutetakis,
and P. Seferlis. “Model Predictive Control of a Fluid Catalytic Cracking Pilot
Plant”, 9th Conference on Process Integration, Modelling
and Optimisation for Energy Saving and Pollution
Reduction, PRES’06,
103.
Klemeš J. J, I. Bulatov, P. Seferlis, E. Koltsova,
P. Kapustenko, and M. Zhekeyev.
“Waste Minimisation and Utilisation in Phosphoric Acid Industry”, CISAP-2,
104.
Seferlis P., and
L. Pechlivanos, “A Model-Predictive Control Strategy
For Optimal Inventory And Pricing Policies In Supply Chain Networks”, EMCC-4,
105.
Seferlis P., N. Dalaouti, E. Y. Kenig, B. Huepen, P. Patil, M. Jobson, J. Klemes, P. Proios, M. C. Georgiadis, E. N. Pistikopoulos,
S. Singare, C. S. Bildea,
J. Grievink, P. J. T. Verheijen,
M. Hostrup, P. Harper, G. Vlachopoulos,
C. Kerasidis, J. Katsanevakis,
D. Constantinidis, P. Stehlik,
and G. Fernholz, “Modelling
and Optimisation of Industrial Absorption Processes:
An EC Collaborative Research Project”, European
Symposium on Computer Aided Process Engineering–15,
106.
Papadopoulou S., G. Kokolaki, I. Anastasiou, S. Voutetakis, and P. Seferlis, “Modeling
and parameter estimation of a catalyst deactivation fluidized bed reactor”, 5th International Conference on
Technology and Automation, Thessaloniki, Greece, 2005.
107.
Seferlis P., and
L. Pechlivanos, “Integrated Inventory and Pricing
Policies for Supply Chain Networks”, Annual AIChE Meeting, Austin TX, U.S.A., 2004.
108.
Dalaouti N.,
and P. Seferlis, “A Unified Modelling Approach for
the Design of Complex Separation Processes”, Annual AIChE Meeting, Austin TX, U.S.A., 2004.
109.
Seferlis P., and
L. Pechlivanos, “Optimal Inventory and
Pricing Policies for Supply Chain Networks”, European Symposium on
Computer Aided Process Engineering-14,
110.
Seferlis P., “Optimal
Process Design based on Static and Dynamic Controllability Criteria”, 84th Canadian Conference of Chemical
Engineering,
111.
Dalaοuti N., and P. Seferlis, “Design
Sensitivity of the Dynamic Behaviour in Reactive
Absorption Processes”, 6th Conference
on Process Integration, Modelling and Optimisation for
Energy Saving and Pollution Reduction, PRES’03,
112.
Seferlis P., and
N. F. Giannelos, “An
Optimisation based Control Strategy for Multi-Echelon
Supply Chain Networks”, 84th Canadian
Conference of Chemical Engineering,
113.
Voutetakis S., P. Seferlis, S. Papadopoulou,
and G. Kyriakos, “Model-based
Control of a Fluidised-bed Furnace”, 6th Conference on Process Integration, Modelling and Optimisation for
Energy Saving and Pollution Reduction, PRES’03,
Hamilton, Canada, 2003.
114.
Seferlis
P., and N. F. Giannelos, “A
Two-Layered Optimization-Based Control Strategy for Multi-Echelon Supply Chain
Networks”, European Symposium on
Computer Aided Process Engineering-13,
115.
Dalaοuti N, and P. Seferlis, “Design
Sensitivity Of The Dynamic Behaviour In Reactive
Absorption Processes”, EMCC-3,
116.
Seferlis P., and Kiparissides C., “Prediction
of the Joint Molecular Weight-Long Chain Branching Distribution in Free-Radical
Branched Polymerizations”, European
Symposium on Computer Aided Process Engineering-12,
117.
Seferlis P., and
C. Kiparissides, “Prediction of the Joint Molecular
Weight-Long Chain Branching Distribution in Free-Radical Branched
Polymerizations”, 82nd Canadian
Conference of Chemical Engineering,
118.
Seferlis P., and
C. Kiparissides, “Optimizing
Control of Molecular Weight Properties for Batch Free-Radical Polymerization
Reactors”, DYCOPS-6, S. Korea, 2001.
119.
Mourikas G., P.
Seferlis, A. J. Morris, and C. Kiparissides, "On-line
Optimal Operating Policy and Control of a Batch Free-Radical Polymerization
Reactor", European Symposium on
Computer Aided Process Engineering-11,
120.
Seferlis P., and
J. Grievink, “Plant
Design based on Economic and Static Controllability Criteria”, Foundations
of Computer Aided Process Design, Foundations
of Computer Aided Process Design, FOCAPD
‘99,
121.
Seferlis P., and
J. Grievink, “Process
Control Structure Screening by Steady-State Multiple Disturbance Sensitivity
Analysis”, European Symposium on
Computer Aided Process Engineering-9,
122.
Seferlis P.,
“Reactive Distillation Processes – Design and Optimization”, Annual Symposium of Chemical Process
Technology, Lunteren, The Netherlands, 1999.
123.
Seferlis P.,
“Integrated Process Design and Control”, Annual
Symposium of the Dutch Research Institute of Chemical Technology, OSPT,
124.
Seferlis P., and
J. Grievink, “Optimal
Design of Reactive Distillation Units under Uncertainty using Collocation
Models”, Annual AIChE
Meeting,
125.
Seferlis P., and
A. N. Hrymak, “Sensitivity Analysis Methods in
Process Optimization”, Annual AIChE Meeting, S. Francisco, CA, U.S.A., 1994.
126.
Seferlis P., and
A. N. Hrymak, “Error-based Adaptive Mesh Selection
for Collocation Models of Multistage Separation Processes”, Annual AIChE
Meeting,
127.
Seferlis P., and
A. N. Hrymak, “Reduced Order Models for Distillation
Optimization”, Annual AIChE
Meeting,
1.
Damartzis T.,
A. I. Papadopoulos, P. Seferlis, “Generalized Framework for the Optimal Design
of CO2 Capture Processes using Amine Solvents”, 9th Greek Chemical Engineering Conference, Athens, 2013.
2.
Ziogou C.,
D. Ipsakis, P. Seferlis, Bezergianni
S., S. Papadopoulou, S. Voutetakis,
“Supervisoty Control, Aytomation
and Optimal Operation of a Solar Hydrogen Production Station”, 9th Greek Chemical Engineering Conference,
Athens, 2013.
3.
A. I.
Papadopoulos, Giaouris D., Ziogou
C., Ipsakis D., P. Seferlis, S. Papadopoulou,
S. Voutetakis, Elmasidis
C., “Optimal Design of Hybrid Power Generation Systems with Hydrogen Production
using System Models”, 9th Greek Chemical
Engineering Conference, Athens, 2013.
4.
A. I.
Papadopoulos, M. Stijepovic, P. Linke,
P. Seferlis, S. Voutetakis, “Molecular Design Of
Working Fluid Mixtures For Organic Rankine Cycles”, 9th Greek Chemical Engineering Conference,
Athens, 2013.
5.
Ipsakis D., Kyriakides A., S. Voutetakis, P.
Seferlis, S. Papadopoulou, Lemonidou
A., Ouzounidou M., and N. Drakaki,
“Enhancement of the catalytic reforming of methane in low temperature with
simultaneous hydrogen separation through Pd
membrane”, 12th Greek
Catalysis Conference, Chania, 2012.
6.
Ipsakis D., S. Voutetakis, S. Papadopoulou, and
P. Seferlis, “Disturbance Compensation Study in an
Integrated System of Methanol Reforming for the Production of Hydrogen and
Energy in a Fuel Cell” 8th Greek Chemical
Engineering Conference,
Thessaloniki, 2011.
7.
Papadopoulos A.
I., M. Stijepovic, P. Linke,
P. Seferlis, and S. Voutetakis, “Power
Generation from Low Enthalpy Geothermal Fields by Design and Selection of
Efficient Working Fluids for Organic Rankine Cycles”,
8th Greek Chemical Engineering
Conference, Thessaloniki, 2011.
8.
Giannakoudis G., Papadopoulos A. I., and P. Seferlis, “Integrated
Design under Uncertainty of Hybrid Power Generation Systems using Renewable
Energy Sources with Simultaneous Hydrogen Production”, 8th Greek Chemical Engineering Conference, Thessaloniki,
2011.
9.
Giannakoudis T., Vezirakis G., Konstantinou
K., D. Ipsakis, Papadopoulos A. I., P. Seferlis, and
S. Voutetakis, 9th
Conference on Solar Energy, Cyprus, 2009.
10.
A. I.
Papadopoulos, and P. Seferlis, “Solvent design and selection for optimal
process design and controllability properties”, 7th Greek Chemical Engineering Conference, Patras, 2009.
11.
A. I.
Papadopoulos, and P. Seferlis, “Design under uncertainty using simulated
annealing methods”, 7th Greek
Chemical Engineering Conference, Patras, 2009.
12.
Damartzis T.,
and P. Seferlis, “Optimal design of three-phase reactive distillation columns”,
7th Greek Chemical Engineering
Conference, Patras, 2009.
13.
Ipsakis D., Vezyrakis G., Constantinou
C., Giannakoudis G., A. I. Papadopoulos, Ziogou C., S. Voutetakis, amd P. Seferlis, “Optimal Design and Operation of a
Combines Solar/Wind Power Unit with Simultaneous Hydrogen Storage”, Solar
Technology Conference, 665-672, 2009.
14.
Ouzounidou M.,
D. Ipsakis, S. Voutetakis,
S. Papadopoulou, and P. Seferlis, “Experimental and Simulation
Studies of a Methanol Reforming and Fuel Cell Power System”, 10th Greek Catalysis Conference,
2008.
15.
Ipsakis D.,
S. Voutetakis, P. Seferlis, Stergiopoulos
F, Elmasides C., Keivanidis
C., and S. Papadopoulou, “Simulation studies of an
integrated renewable energy sources power system with simultaneous hydrogen
storage”, 3rd National
Hydrogen Technology Conference, 2007.
16.
Anastasiou I.,
C. Ziogou, S. Papadopoulou,
S. Voutetakis, C. Kostaras,
and P. Seferlis, “Development of a model predictive control system for the
pilot cyclic propylene steaming (CPS) unit”, 6th Greek Chemical Engineering Conference, Athens, 2007.
17.
Bollas G.,
I. Anastasiou, C. Ziogou,
S. Voutetakis, S. Papadopoulou,
and P. Seferlis, “Development of an optimal control system with parameter
estimation for a pilot fluidized catalytic cracking (FCC) unit”, 6th Greek Chemical Engineering Conference, Athens, 2007.
18.
Papadopoulos A.
I., K. Theodosiades, P. Seferlis, C. Kerasidis, G. Vlachopoulos, and
G. Kapetanakis, “Optimal design of an industrial
phosphoric acid process”, 6th Greek Chemical Engineering Conference, Athens, 2007.
19.
Ipsakis D.,
S. Voutetakis, P. Seferlis, F. Stergiopoulos,
and C. Elmasides, “Design of an autonomous energy
production system from renewable energy sources with simultaneous hydrogen
production”, 6th Greek Chemical Engineering Conference, Athens, 2007.
20.
Dalaouti N.,
and P. Seferlis, “Optimal
design of complex separation units”, 5th Greek Chemical Engineering Conference,
21.
S. Papadopoulou A., I. Anastasiou, G. Kokolaki, S. Voutetakis, and P. Seferlis, “Mathematical
modeling and parameter estimation of a fluidized bed reactor for catalyst
deactivation”, 5th Greek Chemical Engineering Conference,
Thessaloniki, 2005.
22.
Martavaltzi C.,
A. Iordanidis, S. Voutetakis,
P. Seferlis, and P. Swinkels, “Modeling of a methanol
reformer for the production of hydrogen in fuel cells”, 5th Greek Chemical
Engineering Conference,
23.
Dalaouti N.,
and P. Seferlis, “Design
sensitivity of the dynamic behaviour of reactive
absorption processes”, 4th Greek Chemical Engineering Conference, Patras, 2003.
24.
P. Seferlis, and
N. F. Giannelos, “Design
of chemical processes with desired dynamic behaviour”
4th Greek Chemical Engineering Conference, Patras,
2003.
25.
P. Seferlis, and
N. F. Giannelos, “Optimal
operation of multi-echelon supply chain networks” Proceedings of the 4th
Greek Chemical Engineering Conference, Patras,
2003.
1.
Papadopoulos
A.I., P. Seferlis, and T. Zarogiannis.
“Computer-Aided Molecular Design of Post-Combustion CO2 capture solvents: From
Conceptual Screening to Rigorous Validation”, 2nd Hellenic Forum for Science, Technology and Innovation,
National Center for Science and Research –
Democritus, Athens, Greece, 2014.
2.
Papadopoulos
A.I., P. Seferlis, and T. Damartzis. “Design of
Optimum Amine-based CO2 capture flowsheets”, 2nd Hellenic Forum for Science,
Technology and Innovation, National Center for
Science and Research – Democritus, Athens, Greece, 2014.
3.
Papadopoulos
A. I., and P. Seferlis, “Multi-scale Integration of Computer-aided
Molecular Synthesis with Process and Control Systems Design for Efficient
Post-combustion CO2 Capture: An Overview of the EC CAPSOL Project”, ETH Zurich, Switzerland,
2012.
4.
Seferlis P., “System Engineering
Technologies in Autonomous Power Systems Using Renewable Energy Sources
Integrated with Hydrogen Production, Storage and Utilization”, Universität Paderborn, Germany, 2012.
5.
Seferlis P., and
A.I. Papadopoulos, “A Framework for Extraction Solvent Selection based on
Optimal Process Performance and Operability Properties”, Universität
Paderborn, Germany, 2012.
6.
Seferlis P., and
A.I. Papadopoulos, “An Integrated Framework for Optimal Solvent Selection and
Separation Process Design Based on Economic and Controllability Criteria”,
7.
Seferlis P.,
“System Engineering Technologies in Autonomous Power Systems Using Renewable
Energy Sources and Hydrogen”,
8.
Seferlis P., and A. I. Papadopoulos, “Process
Design and Optimization”, COVAPHOS III,
9.
Voutetakis S.,
G. Bollas, I. Anastasiou,
S. Papadopoulou, and P. Seferlis, “A non-linear MPC
strategy for conversion targeting in a FCC pilot plant – Development and
online implementation”, PSE User’s Meeting,
10.
Seferlis P., “Process design and control structure evaluation and
screening using nonlinear sensitivity analysis”, Technical University of
Eindhoven, The Netherlands, 2004.
11.
Seferlis P., “Modelling and optimization of industrial absorption
processes – A European collaboration research project”, IChemE Reactive Separations Symposium,
12.
Seferlis P.,
“Optimal Design and Sensitivity Analysis of Reactive Distillation Units”, research
meeting in the design of reactive distillation units,
13.
Seferlis P.,
“Process Design and Control Structure Screening based on Economic and Static
Controllability Criteria”, Delft University of Technology, DIOC 6,
14.
Seferlis P.,
“Integrated Process Design and Control”,