A.A. Κωνσταντινίδης

Επίκουρος Καθηγητής

Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης

Προσωπικά Στοιχεία
Εκπαίδευση
Δημοσιεύσεις

Μαθήματα
Τεχν. Μηχανική-Αντοχή

Μηχανική Συνεχούς

Μηχανική Μικρο-Νανο Δομών

Νανομηχανική

Συνδέσεις
RTN DEFINO
RTN DIGA
HEAL-LINK
Google

Αγγλικά

Εργαστήριο Μηχανικής και Υλικών

Πολυτεχνική Σχολή

Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης

Θυρίδα 421

ΤΚ-54124, Θεσσαλονίκη

Ελλάς

e-mail: akonsta@gen.auth.gr

Προσωπικά Στοιχεία

Επ. Καθηγητής, Τομέας Μηχανικής, Πολυτεχνική Σχολή, Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης, Θεσσαλονίκη, Ελλάς

Μαθήματα

· Τεχνική Μηχανική–Αντοχή Υλικών (Διαφάνειες, Σημειώσεις)

       Λυμένες Ασκήσεις

· Μηχανική Συνεχούς (Βιβλίο, Διαφάνειες, Περίληψη)

· Μηχανική των Υλικών και Μικρο–  Νανο– Δομών

· Νανομηχανική

· ΕΠΙΠΛΕΟΝ ΣΗΜΕΙΩΣΕΙΣ ΤΜΗΜΑΤΟΣ ΠΟΛ. ΜΗΧΑΝΙΚΩΝ

 ΠΡΟΟΔΟΣ 2015-16   ΤΜΗΜΑ ΗΛΕΚΤΡΟΛΟΓΩΝ ΜΗΧ.

 ΠΡΟΟΔΟΣ 2015-16   ΤΜΗΜΑ ΤΟΠΟΓΡΑΦΩΝ ΜΗΧ.

 ΠΡΟΟΔΟΣ 2015-16   ΤΜΗΜΑ ΠΟΛΙΤΙΚΩΝ ΜΗΧ.

Εκπαίδευση

Διδακτορικό Δίπλωμα, Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης, Θεσσαλονίκη, Ελλάς  (2000)

Θέμα: Εφαρμογή της Θεωρίας των Κυματιδίων και Νευρωνικών Δικτύων στη Μηχανική Συμπεριφορά Υλικών

Δίπλωμα Ηλεκτρολόγου Μηχανικού, Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης, Θεσσαλονίκη, Ελλάς (1996)

Συμμετοχή σε Editorial Boards

Computer and Experimental Simulations in Engineering and Science (CESES)

Journal for the Mechanical Behaviour of Materials (JMBM)

 Δημοσιεύσεις

Διδακτορική Διατριβή

Κωνσταντινίδης, A.A., 2000, Εφαρμογή της Θεωρίας των Κυματιδίων και Νευρωνικών Δικτύων στη Μηχανική Συμπεριφορά Υλικών, Διδακτορική Διατριβή, Αριστοτέλειο Πανεπιστήμιο Θεσσαλονίκης, Θεσσαλονίκη, Ελλάς.

Άρθρα σε Επιστημονικό Περιοδικά [Ετεροαναφορές]

1. Doulgeri Z., Fahantidis N. And Konstantinidis A., 1998, On the Decoupling of Position and Force Controllers in Constrained Robotic Tasks, J. Robotic Systems 15, 323-340. [5]

2. Moutsopoulos K.N., Konstantinidis A.A., Meladiotis I.D., Tzimopoulos Ch.D. and Aifantis E.C., 2001, Hydraulic Behavior and Contaminant Transport in Multiple Porosity Media, Transport in Porous Media 42, 265-292. [8]

3. Huber N., Konstantinidis A. and Tsakmakis Ch., 2001, Determination of Poisson’s Ratio by Spherical Indentation Using Neural Networks – Part I: Theory, Trans. ASME J. Applied Mechanics 68, 218-222. [14]

4. Frantziskonis G., Konstantinidis A. and Aifantis E.C., 2001, Scale-dependent constitutive relations and the role of scale on nominal properties, Eur. J. Mech. A/Solids 20, 925-936. [5]

5. Konstantinidis A., Frantziskonis G., Carpinteri A. and Aifantis E.C., 2001, Size Effects on Tensile Strength and Fracture Energy in Concrete: Wavelet vs. Fractal Approach, J. Mechan. Behav. Materials 12, 63-75.

6. Konstantinidis A., Ioannidou T., Kehagias A. and Aifantis E.C., 2001, Gradient Constitutive Equations, Size Effects and Artificial Neural Networks, J. Mechan. Behav. Materials 12, 141-157.

7. Konstantinidis A. and Aifantis E.C., 2002, Recent Developments of Gradient Theory. Part II: Plastic Heterogeneity and Wavelets, J. Engng. Mater. Technology 124, 358-364. [10]

8. Tsagrakis I., Konstantinidis A. and Aifantis E.C., 2003, Strain gradient and wavelet interpretation of size effects in yield and strength, Mechanics of Materials 35, 733-745. [6]

9. Tsagrakis I., Konstantinidis A. and Aifantis E.C., 2003, Size Effects in Tension: Gradient Internal Variable and Wavelet Models, J. Mechan. Behav. Materials 14, 41-58.

10. Tsagrakis I., Efremidis G., Konstantinidis A. and Aifantis E.C., 2005, Deformation vs. Flow and Wavelet-Based Models of Gradient Plasticity: Examples of  Axial Symmetry, Int. J. Plasticity 22, 1456-1485. [2]

11. Fyffe, B., Schwerdtfeger, J., Blackford, J.R., Zaiser, M., Konstantinidis, A. and Aifantis, E.C., 2007, J. Mechan. Behav. Materials 18, 195-215.

12. Aifantis, K.E. and Konstantinidis, A.A., 2009, Yielding and tensile behavior of nanocrystalline copper, Mat. Sci. Engng. A 503, 198-201. [1]

13. Aifantis, K.E,  Konstantinidis, A.A. and Hackney, S.A., 2009, On some aspects of interfaces at the nanoscale, J. Mechan. MEMS 1, 105.

14. Aifantis K.E. and Konstantinidis A.A., 2009, Hall-Petch revisited at the nanoscale, Mater. Sci. Engng. B 163, 139-144.

15. Zaiser M., Moretti P., Konstantinidis A. and Aifantis E.C., 2009, Nucleation of interfacial shear cracks in thin films on disordered substrates, J. Stat. Mech.  P02047 (1-12).

16. Konstantinidis A., Cornetti P., Pugno N. and Aifantis E.C., 2009, Application of gradient theory and quantized fracture mechanics in snow avalanches, J. Mechan. Behav. Materials 19, 39-48.

17. Zaiser M., Moretti P., Konstantinidis A. and Aifantis E.C., 2009, Roughening and pinning of interface cracks in shear delamination of thin films, J. Stat. Mech., P11009.

18. Aifantis, K.E., Konstantinidis, A.A. and Forest, S., 2010, Modeling strain localization bands in metal foams, J. Comput. Theor. Nanosci. 7, 1-7.

Άρθρα σε Πρακτικά Συνεδρίων / Τεχνικές Εκθέσεις

1.  Konstantinidis A., Frantziskonis G. and Aifantis E.C., Wavelets Approach to Adiabatic Shear Banding, in: Proc. of the 5^th National Congress on Mechanics 2, pp. 930-936, Ioannina, Greece, 1998.

2.   Κωνσταντινίδης Α., Ποντίδου Χ. και Αϋφαντής Η.Χ., Εφαρμογές της θεωρίας των Βαθμίδων Παραμόρφωσης και των Κυματιδίων στις Αστάθειες Πολυμερικών Υλικών, Πρακτκά του 2ου Πανελλήνιου Επιστημονικού Συνεδρίου Χημικής Μηχανικής”, Θεσσαλονίκη, 27-29 Μαϊου, 1999.

3.  Κωνσταντινίδης Α., Υβριδικός Έλεγχος Ρομποτικού Βραχίονα, Διπλωματική Εργασία, ΑΠΘ, Θεσσαλονίκη, 1996.

4.  Konstantinidis, A.A., 2000, Application of the theory of Wavelets and Neural Networks on the Mechanical Behaviour of Materials, PhD Thesis (in Greek), Aristotle University of Thessaloniki, Thessaloniki, Greece.

5.   Tsagrakis I., Konstantinidis A. and Aifantis E.C., Internal Variable and Wavelet Models for Size Effects in Smooth Specimens, Milestone Report for REVISA Program(Contract No FI4S-CT96-0024), December 2000.

6.   Zaiser, M., Fyffe, B., Moretti, P., Konstantinidis, A. and Aifantis, E.C., Pinning and propagation of interface cracks in slope failure: 1D and 2D considerations, in: Proc. of the 2nd International Symposium on Continuous and Discontinuous Modelling of Cohesive Frictional Materials (CDM2004), eds. P.A. Vermeer, W. Ehlers, H.J. Hermann and E. Ramm, A.A. Balkema Publishers, pp. 435-446, 2004. [2]

7.   Aifantis, K.E. and Konstantinidis A., Applications of gradient deformation theory of plasticity to nanopolycrystals, in: Proc. of PLASTICITY ’05, eds. A.S. Khan and A.R. Khoei, Neat Press, pp.469-471, 2005.

8.  Konstantinidis, A., Pugno, N., Cornetti, P. and Aifantis, E.C., Avalanche Mechanics: LEFM vs. Gradient Model, in: Proc. of the 16th European Conference of Fracture (ECF16), CD-ROM, 2006.

9. Konstantinidis, A. and Aifantis, K.E., On the application of gradient plasticity and wavelet analysis to model the plastic deformation of nanocrystalline materials, in: Proc. of 8th HSTAM Int. Congress on Mechanics, Eds. N. Bazeos et al, pp. 637-644 (2007).

10. Zaiser M., Moretti P., Konstantinidis A.A. and Aifantis E.C., Shear failure on disordered substrates: Nucleation and propagation of interfacial shear cracks, in: Proc: 4th Int. Conference on Multiscale Materials Modeling/MMM2008, ed. A. El-Azab, Dept. of Scientific Computing, Florida State University, pp. 126-131, 2008.

11. K.E. Aifantis, A.A. Konstantinidis and M. Zaiser, Damage evolution in foams, in: Proc: 4th Int. Conference on Multiscale Materials Modeling/MMM2008, ed. A. El-Azab, Dept. of Scientific Computing, Florida State University, pp. 253-256, 2008.

12. Konstantinidis A.A. and Aifantis K.E., in: Proc. ENOC 2011, July 2011, Rome, CD ROM.

Ετεροαναφορές [Άρθρο σε Επιστημονικό Περιοδικό]

Σύνολο: 54

Aifantis, E.C., 2003, Update on a class of gradient theories, Mechanics of Materials 35, 259-280. [PhD Thesis]

Ruiz-Leon, J., Sapiens, A.J., Celikovsky, S. and Torres, J.A.M., 2004, Decoupling with stability: Application to the real time control of a water storing plant, Asian J. Control 6, 415-420. [#1]

Shen, Y. and Hueper, P., 2005, A joint space formulation for compliant motion control of robot manipulators, in: Proc. of IEEE Int. Conf. on Mechatronics and Automation (ICMA 2005), pp. 362-369. [#1]

Shen, Y., 2006, Joint-space recipes for manipulator  robots performing compliant motion tasks: Trajectory-optimization, interpolation and control, PhD Thesis, Australian National University, Canberra, Australia. [#1]

Khayati, K., Bigras, P. and Dessaint L.-A., 2006, A multistage position/force control for constrained robotic systems with friction: Joint-space decomposition, linearization, and multiobjective observer/controller synthesis using LMI formalism, IEEE Trans. Industrial Electronics 53, 1698-1712. [#1]

Pedrocchi, N., Visioli, A., Ziliani, G. and Legnani, G., 2008, On the elasticity in the dynamic decoupling of hybrid force/velocity control in the contour tracking task, in: Proc. 2008 IEEE/RSJ Int. Conf. on Intelligent Robots and Systems, Nice, France, Sept, 22-26, pp. 955-960 [#1]

Abbo, H., Shavit, U., Markel, D. and Rimmer, A., 2003, A numerical study on the influence of fractured regions on lake/groundwater interaction; the Lake Kinneret (Sea of Galilee) case, J. Hydrology 283, 225-243. [#2]

Pride, S.R. and Berryman, J.G., 2003, Linear dynamics of double-porosity dual-permeability materials. I. Governing equations and acoustic attenuation, Phys. Review E 68, 036603. [#2]

Zhang, J., Roegiers, J.-C. and Bai, M., 2004, Dual-porosity elastoplastic analyses of non-isothermal one-dimensional consolidation, Geotech. and Geological Engng. 22, 589-610. [#2]

Zhang, J. and Roegiers, J.-C., 2005, Double porosity finite element method for borehole modeling, Rock Mechanics and Rock Engineering 38, 217-242. [#2]

Nield, D.A. and Kuznetsov, A.V, 2008, Natural convection about a vertical plate embedded in a bidisperse porous medium, Int. J. Heat and Mass Transfer 51, 1658-1664. [#2]

Scesi, L. and Gattinoni, P., 2009, Water Circulation in Rocks, Springer, Dordrecht. [#2]

Bouchelaghem, F., 2010, Analytical determination of flow patterns in a double porosity medium containing ellipsoidal occluded macro-voids, Transp. Porous Med.  85, 97–115. [#2]

Bouchelaghem, F., 2010, Flow study in a double porosity medium containing low concentrations of ellipsoidal occluded macro-voids. I. analytical determination of fluid pressure and velocities, Math. Geosci., DOI 10.1007/s11004-010-9309-2. [#2]

Gu, Y., Nakamura, T., Prchlik, L., Sampath, S. and Wallace, J., 2003, Micro-indentation and inverse analysis to characterize elastic-plastic graded materials, Mat. Sci. Engng. A – Struct. Mat. Prop. Microstr. Processing 345, 223-233. [#3]

Kogut, L. and  Komvopoulos, K., 2004, Analysis of the spherical indentation cycle for elastic-perfectly plastic solids, J. Mater. Res. 19, 3641-3653. [#3]

Abendroth, M. and Kuna, M., 2004, Determination of ductile material properties by means of the small punch test and neural networks, Adv. Engng. Materials 6, 536-540. [#3]

Mackerle, J., 2004, Finite element modelling and simulation of indentation testing: A bibliography (1990-2002), Eng. Comput. 21, 23-52. [#3]

Abendroth, M. and Kuna, M., 2006, Identification of ductile damage and fracture parameters from the small punch test using neural networks, Engng. Fracture Mechanics 73, 710-725. [#3]

Rauchs, G., 2006, Optimization-based material parameter identification in indentation testing for finite strain elasto-plasticity, ZAMM Zeitschrift fur Angewandte Mathematik und Mechanik 86, 539-562. [#3]

Zhao, J.-C., 2005, Combinatorial approaches as effective tools in the study of phase diagrams and composition–structure–property relationships, Progr. Mat. Sci. 51, 557-631, 2006. [#3]

Zheng, Y.P., Choi, A.P.C., Ling, H.Y., Huang, Y.P., 2009, Simultaneous estimation of Poisson's ratio and Young's modulus using a single indentation: A finite element study, Measur. Sci. Technol. 20, 045706. [#3]

Balakrishnan, A. and Socrate, S., 2008, Material property differentiation in indentation testing using secondary sensors, Experimental Mechanics 48, 549-558. [#3]

Galli, M. and Oyen, M.L., 2009, Fast identification of poroelastic parameters from indentation tests, Comp. Model. Engng. Sci. 48, 241-268. [#3]

Rauchs, G. and Dumitriu, D.,  Indentation testing parameter identification using an optimization procedure based on genetic algorithms, Proc. Rom. Acad. A [#3]

Cortes, D.H., Garcia, J.I. and Garcia, J.J., 2002, Uso de redes neuronales para analizar modelos mecanicos de tejidos biologicos, in: Proc. Of VI Congreso Colombiano de Elementos Finitos y Midelamiento Numerico, Bogota, Colombia, May 2002. [#3]

Abentroth, M., 2004, Identifikation elastoplastischer und schaedigungsmechanischer materialparameter aus dem small punch test, PhD. Thesis, Technishen Universitaet Bergakademie Freiberg, Freiberg, Germany. [#3]

Schick, D., 2004, Anisotropic Plasticity and Viscoplasticity, PhD. Thesis, TU Darmstadt, Germany, 2004. [#3]

Jing, L., 2003, A review of techniques, advances and outstanding issues in numerical modelling for rock mechanics and rock engineering, Int. J. Rock Mech. Mining Sci. 40, 283-353. [#4]

Alava, M.J., Nukala, P.K.V.V. and Zapperi, S., 2006, Statistical models of fracture, Advances in Physics 55, 349-476. [#4]

Kim, G.-Y., Ni, J. and Koç, M., 2007, Modeling of the size effects on the behavior of metals in microscale deformation processes, J. Manufact. Sci. Engng., Trans. ASME 129, 470-476. [#4]

G. Exadaktylos and M. Stavropoulou, A specific upscaling theory of rock mass parameters exhibiting spatial variability: Analytical relations and computational scheme, Int. J. Rock Mechanics & Mining Sciences, in press, 2008. [#4, #8]

Makridis, D., 2009, Die Wahl der Variablen bei der Formulierung von Stoffgesetzen der mikropolaren Plastizität, PhD. Thesis, TU Darmstadt, Germany, 2009. [#4]

Abu Al-Rub, R.K. and Voyiadjis, G.Z., 2004, Analytical and experimental determination of the material intrinsic length scale of strain gradient plasticity theory from micro- and nano-indentation experiments, Int. J. Plasticity 20, 1139-1182. [#7]

Battaile, C.C and Holm, E.A., 2004, Simulating the interactions between microstructure and deformation, in: Proc. ASME Design Engineering Technical Conference, Vol. 3, pp. 661-662. [#7]

Voyiadjis, G.Z. and Abu Al-Rub, R.K., 2005, Gradient plasticity theory with a variable length scale parameter, Int. J. Solids Struct. 42, 3998-4029. [#7]

Abu Al-Rub, R.K. and Voyiadjis, G.Z., 2006, A physically based gradient plasticity theory, Int. J. Plasticity 22, 654-684. [#7]

Battaile, C.C. and Holm, E.A., 2005, in: Proc. of the ASME Design Engineering Technical Conference, vol. 3, pp. 661-662. [#7]

Anathakrishna, G., 2007, Current theoretical approaches to collective behavior of dislocations, Physics Reports 440, 113-259. [#7]

Anathakrishna, G., 2007, Statistical and Dynamical Approaches to Collective Behavior of Dislocations  (Chapter 73 ), Dislocations in Solids 13, pp. 81-223. [#7]

Darowicki, K., Orlikowski, J. and Zieliński, A., 2008, Investigation of changes in the type B PLC effect of Al-Mg-Cu type alloy for various strain rates, Mat. Sci. Engng. A 496, pp. 478-482. [#7]

Abu Al-Rub, R.K. , 2004, Material Length Scales in Gradient-Dependent Plasticity/Damage and Size Effects: Theory and Computation, PhD. Thesis, Louisiana State University, Baton Rouge, USA.  [#7, #8]

Zhao, J., Sheng, D. and Zhou, W., 2005, Shear banding analysis of geomaterials by strain gradient enhanced damage model, Int. J. Solids Struct., to appear. [#7, #8]

Aifantis, K.E. and Ngan, A.H.W., 2007, Modeling dislocation-grain boundary interactions through gradient plasticity and nanoindentation, Mat. Sci. Engng. A459, 251-261. [#8]

Voyiadjis, G.Z., Abu Al-Rub, R.K. and Palazotto, A.N., 2004, Thermodynamic framework for coupling of non-local viscoplasticity and non-local anisotropic viscodamage for dynamic localization problems using gradient theory, Int. J. Plasticity 20, 981-1038. [#8]

Li, M.-L. and Fu, M.-F., Limit analysis of viscoplastic thick-walled cylinder and spherical shell under internal pressure using a strain gradient plasticity theory, Appl. Math. Mech. (English Edition) 29 (12), 1553-1559. [#8]

Bardella, L., 2007, Some remarks on the strain gradient crystal plasticity modelling, with particular reference to the material length scales involved, Int. J. Plasticity 23, 296-322. [#10]

Bardella, L. and Giacomini, A., 2008, Influence of material parameters and crystallography on the size effects describable by means of strain gradient plasticity,
J. Mech. Phys. Solids, In Press. [#10]

Aifantis, E.C., 2009, Deformation and failure of bulk nanograined and ultrafine-grained materials, Mater. Sci. Engng. A 503, 190-197. [#12]

Kronholm, K. and Birkeland, K.W., 2005, Integrating spatial patterns into a snow avalanche cellular automata model, Geophysical Research Letters 32, 1-4. [#16]

Schweizer, J., Kronholm, K.,  Bruce Jamieson, J. and Birkeland, K.W., 2007, Review of spatial variability of snowpack properties and its importance for avalanche formation, Cold Regions Science and Technology 51, 252-273, 2008. [#16]